Deep groove ball bearing, are conventional bearings. In this type of bearing, pressure is applied to the outer surface of the bearing and this pressure is transferred through the sockets to the inner part because the sockets are spherical with only a small part of their surface in contact with the surfaces.
So friction is greatly reduced, and these kinds of bearings move easily and smoothly, because only a small surface of the pads are in contact, so you can’t put a lot of pressure on them, because it changes the shape of the bearing, and after a while the bearing doesn’t work properly.
Product Images
deep groove ball bearing
In this type of product, there is a deep circular groove in each ring with a radius equal to the radius of the ring, and they are produced in two types, single-row and double-row. Due to the presence of this groove and the creation of a high contact level between the rings and the rings, these types of ball bearings are able to withstand high radial loads with axial forces.
Due to their ability to withstand radial and axial loads, low friction, and their ability to withstand high speeds, cabred deep groove ball bearings have found widespread use in various industries. Two-row deep groove ball bearings also have the ability to withstand bending loads. Two-row deep groove ball bearings are suitable for short shafts where we only want to use one ball bearing at the end.
Two-piece racks are mostly used in deep groove ball bearing.
Today, deep-slope ball bearing with metal guards or equipped with plastic water-sealing rings are used in very high volumes. Due to the presence of guards or water-sealing rings inside the ball bearing, they remain clean and this increases the life of the ball bearing. These ball bearing are especially suitable for the design of compact machines because there is no longer a need to consider space for installing a bowl to protect the ball bearing.
Classification of deep groove ball bearing
- S type deep groove bearing
- Deep groove ball bearings with a ball groove
- Alternator bearings
- One-row and two-row angular contact bearings
- Bearings with 4-point contact
- Self-adjusting bearing
- Narrow section bearings
Deep groove ball bearings are used in a wide range of applications, including simple machinery, agricultural machinery, conveyor belts, construction machinery, dynamos, car starters, vacuum cleaners, polarizers, woodworking, ventilation, aerospace, welding fixtures, industrial robots, textile and dyeing machinery, optics and optronics.
